Rainbow-electronics MAX6983 Uživatelský manuál stáhnout pdf

General Description

The MAX6983 serial-interfaced LED driver provides 16

open-drain, constant-current-sinking LED driver outputs

rated at 36V. The MAX6983 operates from a 3V to 5.5V

supply. The MAX6983 supply and the LEDs’ supply can

power up in any order. The constant-current outputs

are programmed together to up to 55mA using a single

external resistor. The MAX6983 operates with a 25Mb,

industry-standard, 4-wire serial interface.

The MAX6983 includes circuitry that automatically

detects open-circuit LEDs. Fault status is loaded into the

serial-interface shift register when LE goes high and is

automatically shifted out on DOUT when the next data

transmission is shifted in.

The MAX6983 includes a fail-safe feature for safety-

related applications, which blanks the display if the ser-

ial interface fails. If the serial interface becomes

inactive for more than 1s, all driver output latches are

automatically cleared. This turns off all LEDs connected

to the outputs. The shift register data is not disturbed.

The outputs remain off until the driver output latches are

updated with data turning them on, so recovery is auto-

matic if the transmission failure is temporary. The

watchdog function requires no software change to the

application driving the MAX6983.

The MAX6983 uses the industry-standard shift-register-

plus-latch-type serial interface. The driver accepts data

shifted into a 16-bit shift register using data input DIN

and clock input CLK. Input data appears at the output

DOUT 16 clock cycles later to allow cascading of multi-

ple MAX6983s. The latch-enable input, LE, loads the 16

bits of shift-register data into a 16-bit output latch to set

which LEDs are on and which are off. The output-

enable input, OE, gates all 16 outputs on and off, and is

fast enough to be used as a PWM input for LED intensi-

ty control.

The MAX6983 is one of a family of 12 shift-register-plus-

latch-type LED drivers. The family includes 8-port and

16-port types, with 5.5V- or 36V-rated LED outputs, with

and without open-circuit LED detection and watchdog.

All versions operate from a 3V to 5.5V supply, and are

specified over the -40°C to +125°C temperature range.

Features

♦ 25Mb Industry-Standard, 4-Wire Serial Interface

♦ 3V to 5.5V Logic Supply

♦ 16 Constant-Current LED Outputs Rated at 36V

♦ Up to 55mA Continuous Current per Output

♦ Output Current Programmed by Single Resistor

♦ 3% Current Matching Between Outputs

♦ 6% Current Matching Between ICs

♦ Watchdog Clears Display if Interface Fails

♦ Reports Open-Circuit LED Faults

♦ High-Dissipation, 24-Pin Packages

♦ -40°C to +125°C Temperature Range

MAX6983

16-Port, 36V Constant-Current LED Driver with

LED Fault Detection and Watchdog

________________________________________________________________ Maxim Integrated Products 1

V+

SET

DOUT

OELE

CLK

DIN

GND

TOP VIEW

OUT15

OUT14

OUT13

OUT12OUT3

OUT2

OUT1

OUT0

OUT11

OUT10

OUT9

OUT8OUT7

OUT6

OUT5

OUT4

TSSOP/PDIP

MAX6983AUG

MAX6983ANG

Pin Configuration

Ordering Information

19-3751; Rev 0; 7/05

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Typical Application Circuit and Selector Guide appear at

end of data sheet.

Applications

Variable Message Signs

Marquee Displays

Point-of-Order Signs

Traffic Signs

Gaming Features

Architectural Lighting

PART TEMP RANGE PIN- PACKAGE

PK G

C O D E

MAX6983AUG -40°C to +125°C 24 TSSOP —

MAX6983ANG -40°C to +125°C 24 Narrow PDIP —

1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - Applications

General DescriptionThe MAX6983 serial-interfaced LED driver provides 16open-drain, constant-current-sinking LED driver outputsrated at 36V. The MAX698

Strany 2 - ELECTRICAL CHARACTERISTICS

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog10 _______________________________________________________________

Strany 3 - 5V TIMING CHARACTERISTICS

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog__________________________________________________________________

Strany 4 - 3.3V TIMING CHARACTERISTICS

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and WatchdogMaxim cannot assume responsibility for use of any circuitry other

Strany 5

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog2 ________________________________________________________________

Strany 6 - Pin Description

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog__________________________________________________________________

Strany 7 - Detailed Description

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog4 ________________________________________________________________

Strany 8 - LED Fault Detection

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog__________________________________________________________________

Strany 9 - Applications Information

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog6 ________________________________________________________________

Strany 10 - Chip Information

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog__________________________________________________________________

Strany 11 - Package Information

MAX698316-Port, 36V Constant-Current LED Driver withLED Fault Detection and Watchdog8 ________________________________________________________________

Strany 12 - PDIPN.EPS

Applications InformationSelecting External Component RSETto SetLED Output CurrentThe MAX6983 uses an external resistor, RSET,to set theLED current for

Komentáře k této Příručce

Žádné komentáře

Rainbow-electronics MAX6983 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Rainbow-electronics MAX6983. Rainbow Electronics MAX6983 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Senzory Rainbow-electronics MAX6983