Rainbow-electronics GM862-QUAD-PY Uživatelský manuál stáhnout pdf (Strana 263)

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

#E2SMSRI - SMS Ring Indicator SELINT 0 / 1

Note: as seen before, the value <n>=0 means that the RI pin response to

an incoming SM is disabled.

AT#E2SMSRI=?

Reports the range of supported values for parameter <n>

#E2SMSRI - SMS Ring Indicator SELINT 2

AT#E2SMSRI=

[<n>]

Set command enables/disables the Ring Indicator pin response to an

incoming SMS message. If enabled, a negative going pulse is generated on

receipt of an incoming SMS message. The duration of this pulse is

determined by the value of <n>.

Parameter:

<n> - RI enabling

0 - disables RI pin response for incoming SMS messages (factory default)

50..1150 - enables RI pin response for incoming SMS messages. The

value of <n> is the duration in ms of the pulse generated on receipt of

an incoming SM.

Note: if +CNMI=3,1 command is issued and the module is in a GPRS

connection, a 100 ms break signal is sent and a 1 sec. pulse is generated

on RI pin, no matter if the RI pin response is either enabled or not.

AT#E2SMSRI?

Read command reports the duration in ms of the pulse generated on

receipt of an incoming SM, in the format:

#E2SMSRI: <n>

Note: as seen before, the value <n>=0 means that the RI pin response to

an incoming SM is disabled.

AT#E2SMSRI=?

Reports the range of supported values for parameter <n>

3.5.7.1.32 Analog/Digital Converter Input - #ADC

#ADC - Analog/Digital Converter Input SELINT 0 / 1

AT#ADC[=

[,<dir>]]

Execution command reads pin<adc> voltage, converted by ADC, and

outputs it in the format:

#ADC: <value>

where:

<value> - pin<adc> voltage, expressed in mV

Parameters:

<adc> - index of pin

1 - available for GM862-QUAD, GM862-QUAD-PY, GM862-GPS, GE863-

QUAD, GE863-PY,GE863-GPS, GE864-QUAD, GE864-PY, GC864-

QUAD and GC864-PY

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 433 434

Komentáře k této Příručce

Žádné komentáře

Rainbow-electronics GM862-QUAD-PY Uživatelský manuál Strana 263

Komentáře k této Příručce

Související produkty a manuály pro GPS přijímač Rainbow-electronics GM862-QUAD-PY